Publications / Δημοσιεύσεις

  • Alexandros Vouros, Αλέξανδρος Βούρος
  1. Vouros A., Panidis T. (2008) Influence of a Secondary, Parallel, Low Reynolds number, Round Jet on a Turbulent Axisymmetric Jet, Experimental Thermal and Fluid Science, Vol.32:8, pp.1455-1467
  2. Vouros A., Panidis T. (2007) Multiple Jets Burner Performance in a Small Scale Cylindrical Combustor, Proc. of the Third European Combustion Meeting, Crete, 20-6, pp.1-5.
  3. Vouros A. Giannadakis A. Panidis Th. (2004) Experimental Evaluation of a Basic Staged Combustion Configuration, Proc. Joint Meeting of the Greek and Italian Sections of The Combustion Institute, P25, pp 1-6
  4. Giannadakis A., Romeos A., Vouros A., Perrakis K. Panidis Th. (2004) Experimental Investigation of Confined Coaxial Swirl Flow, Proc. Joint Meeting of the Greek and Italian Sections of The Combustion Institute, P24, pp 1-6.
  5. Giannadakis A., Vouros A., Perrakis K., Panidis Th. (2003) Confined Coaxial Swirl Flow, Proc. Third Meeting of Greek Section of the Combustion Institute, P4, pp. 1-8.
  6. Vouros A., Giannadakis A., Panidis Th. (2003) Round Jets Pairing, Proc. Third Meeting of Greek Section of the Combustion Institute, P2, pp. 1-8.
  7. Panidis T, Perrakis K., Vouros A., Koutmos P., Orfanos S, Papailiou D. (2001) Computational Investigation of Combustion Schemes for Glass Furnaces, Proc. Adv. in Mech. Eng. ASME Greek Section, Paper ANG1/P130.
  8. Vouros A., Panidis Th. (2009), Spray Characterization Measurements of Alternative Fuels, ECATS Progress Meeting, Schliersee.
  9. Vouros A., Skouras Y., Panidis T. (2007) Engine Emissions, Pres. in ECATS Programme Mid-Term Progress Meeting, Pucheim, Munich.
  10. Skouras Y., Vouros A., Panidis T. (2007) Development of an Interface between Air quality Models from Plume to Local (Airport) Scale, Research needs for future Progress, Pres. in ECATS Programme Mid-Term Progress Meeting, Pucheim, Munich.
  11. Vouros A., Panidis T. (2007) Experiments and CFD Tools in Multiple Jets Flow Field, Pres. in ECATS Spring School, Manchester.
  12. Σκούρας Ι., Βούρος Α., Πανίδης Θ. (2008) Ενεργειακές Απαιτήσεις και Περιβαλλοντικές Επιπτώσεις του Συστήματος Αερομεταφορών, Ημερ. Ενέργεια και Περιβάλλον, Πάτρα.
  13. Βούρος Α., Πανίδης Θ. (2006) Πειραματική Διερεύνηση της Αλληλεπίδρασης Ισχυρής και Ασθενούς Δέσμης Εκροής, Πρακτ. Πέμπτης Επιστημονικής Συνάντησης «Ερευνητικές Δραστηριότητες στα Φαινόμενα Ροής Ρευστών στην Ελλάδα», σ. 1-5.
  14. Bούρος Α., Γιανναδάκης Α. Πανίδης Θ. (2004) Μετρήσεις ταχυτήτων και ανώτερων τυρβώδων όρων σε αξονοσυμμετρική δέσμη αέρα, Πρακτ. Τέταρτης Επιστημονικής Συνάντησης «Ερευνητικές Δραστηριότητες στη Μηχανική Ρευστών στην Ελλάδα», σ. 148-154.
  15. Βούρος Α., Γιανναδάκης Α., Πανίδης Θ. (2002) Αλληλεπίδραση Ισοθερμοκρασιακών Δεσμών Αέρα, Πρακτ. Τρίτης Συνάντησης «Ερευνητικές Δραστηριότητες στα Φαινόμενα Ροής Ρευστών στην Ελλάδα», σ. 254-261.
  • Dimitrios Mitrakos, Δημήτριος Μητράκος
  1. M.P. Kissane, D. Mitrakos, C. Housiadas, J.C. Sabroux. I. (2009). Investigation of thermo-catalytic decomposition of metal-iodide aerosols due to passage through hydrogen recombiners, Nuclear Engineering and Design, 239 (12), 3003-3013.
  2. Mitrakos, D., Chatzidakis, S., Hinis, E.P., Herranz, L.E., Parozzi, F. and Housiadas, C. (2008). A simple mechanistic model for particle penetration and plugging in tubes and cracks, Nuclear Engineering and Design, 238, 3370-3378.
  3. Mitrakos, D., Jokiniemi, J., Backman, U. and Housiadas, C. (2008). Aerosol flow in a tube furnace reactor of gas-phase synthesised silver nanoparticles. Journal of Nanoparticle Research, 10, 745-759.
  4. Mitrakos, D., Zdímal, V., Brus, D. and Housiadas, C. (2008). Data evaluation of laminar flow diffusion chamber nucleation experiments with different computational methods. Journal Chemical Physics, 129 (5), 054503.
  5. Mitsakou, C., Mitrakos, D., Neofytou, P. and Housiadas, C. (2007). A Simple Mechanistic Model of Deposition of Water-Soluble Aerosol Particles in the Mouth and Throat. Journal of Aerosol Medicine, 20 (4), 519-529.
  6. Mitrakos, D., Hinis, E. and Housiadas, C. (2007). Sectional Modeling of Aerosol Dynamics in Multi-Dimensional Flows. Aerosol science and Technology, 41(12), 1076-1088.
  7. Kissane, M.P., Mitrakos, D., Sabroux, J.C. and Housiadas, C. (2008). Investigation of thermo-catalytic decomposition of metal-iodide aerosols due to passage through hydrogen recombiners. 2008 European Aerosol Science Conference (EAC2008), Thessaloniki, Aug 24-29.
  8. Parozzi, F., Caracciolo, E., Herranz, L.E., Housiadas, C., Mitrakos, D., Journeau C. and Piluso, P. (2008). Investigation on aerosol leaks through containment cracks in nuclear severe accidents using prototypic materials. 2008 European Aerosol Science Conference (EAC2008), Thessaloniki, Aug 24-29.
  9. Mitrakos, D., Jokiniemi, J., Zdimal V. and Housiadas, C. (2008). Different computational approaches for the simulation of aerosol reactors operation. 2008 European Aerosol Science Conference (EAC2008), Thessaloniki, Aug 24-29.
  10. Demou, E., Hellweg, S., Nicolopoulou, A., Mitrakos, D. and Housiadas, C. (2008). Modelling the uptake and distribution in the lungs of engineered nanoparticles during their synthesis. 2008 European Aerosol Science Conference (EAC2008), Thessaloniki, Aug 24-29.
  11. Mitrakos, D., Hinis, E. and Housiadas, C. (2007). CFD-based sectional modelling of aerosol dynamics: particle formation in an aerosol reactor. International Conference on Multiphase Flow (ICMF 2007), Leipzig, Germany, July 9-13.
  12. Mitsakou, C., Mitrakos, D., Housiadas, C. (2007). The effect of particle hygroscopicity on mouth and throat deposition. 2007 European Aerosol Conference (EAC2007), Salzburg, Austria, Sept 9-14.
  13. Mitrakos, D., Mitsakou, C. and Housiadas, C. (2004). Simulation of laminar flow reactor with an 1-D sectional aerosol model. Eur Aerosol Conf., Budapest, Hungary, Sept 6-10.
  • Dimitrios Christoloukas, Δημήτριος Χριστολουκάς
  • Dimitrios Tzempelikos, Δημήτριος Τζεμπελίκος
  1. Ghiaus, A.G, Filios, A.E., Margaris, D.P. and Tzempelikos, D. (2010), “Industrial drying of wooden pallets – CFD analysis of air flow”, 17th International Drying Symposium, October, 3-6, Magdeburg/Germany.
  2. Tzempelikos, D.A., Filios, A.E. and Margaris, D.P. (2009), “Air flow characteristics in an industrial wood pallet drying kiln”, 3rd Intern. Conference on Experiments/Process/System Modelling/Simulation and Optimization (IC-EpsMsO), Athens, 8-11 July, pp.1-8.
  • Michalis Mentzos, Μιχάλης Μέντζος
  1. Mentzos, M.D., Bacharoudis, E.C., Filios, A.E., and Margaris, D.P. (2007), On the influence of the outlet blade angle in the performance of a radial pump impeller, 2nd International Conference on Experiments/Process/System Modelling/Simulation & Optimization, Athens, 4-7 July.
  2. Grapsas, V.A., Mentzos, M.D., Anagnostopoulos J.S., Filios A.E., Margaris, D.P. and Papantonis D.E. (2006), “Experimental and computational study of a radial flow pump impeller”, 2nd  International Conference “From Scientific Computing to Computational Engineering”, Athens, 5-8 July, pp. 1-9.
  3. Mentzos, M.D., Filios, A.E., Margaris, D.P. and Papanikas, D.G. (2005), “CFD predictions of flow through a centrifugal pump impeller”, 1st International Conference on Experiments/Process/System Modelling/Simulation/Optimization, Athens, 6-9 July, pp. 1-8.
  4. Mentzos, M.D., Filios, A.E., Margaris, D.P., Bacharoudis, E. and Vrachopoulos, M.Gr., (2005), “The use of CFD for flow analysis and performance prediction of centrifugal pumps”, Proceedings of the South-Eastern Europe Fluent Event 2005, 11 – 13 May, Porto Carras Grand Resort, Halkidiki, Greece, pp.1-8.
  5. Mentzos, M.D., Filios, A.E., Margaris, D.P. and Papanikas, D.G. (2004), “A numerical simulation of the impeller-volute interaction in a centrifugal pump”, Conference Proceedings 1st International Conference “From Scientific Computing to Computational Engineering”, Athens, 8-10 September, pp. 1-7.
  • Nikolaos Tachos, Νικόλαος Τάχος
  1. Tachos, N.S., Filios, A.E. and Margaris, D.P.  (2010), “A comparative numerical study of four turbulence models for the prediction of horizontal axis wind turbine flow”, Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, Vol. 224, No.9, pp.1973-1979.
  2. Ν.Σ. Τάχος, Α.Ε. Φιλιός και Δ.Π. Μάργαρης (2009), ‘Επίδραση μοντέλων τύρβης στην αεροδυναμική ανάλυση στροφείων ανεμοκινητήρων’, 9ο Εθνικό Συνέδριο για τις Ήπιες Μορφές Ενέργειας, Πάφος-Κύπρος, 26-28 Μαρτίου.
  3. N.S. Tachos, A.E. Filios, D.P. Margaris, J.K. Kaldellis (2009), ‘A Computational Aerodynamics Simulation of the NREL Phase II Rotor’, The Open Mechanical Engineering Journal,  Vol. 3, p. 9-16.
  4. A.E. Filios, N.S. Tachos, A.P. Fragias and D.P. Margaris (2007), “Broadband noise radiation analysis for an HAWT rotor”, Renewable Energy, Volume 32, Issue 9,  p.1497-1510.
  5. N.S. Tachos, C.K. Zioutis, A.E. Filios and D.P. Margaris (2006), ”Aerodynamic Computational Analysis for a HAWT Rotor”, 2nd IC-SCCE, 5-8 July, Athens.
  6. Ν. Τάχος, Στ. Δούκας, Α.Ε. Φιλιός και Δ. Μάργαρης (2006), “Πρόβλεψη αεροδυναμικού θορύβου ανεμοκινητήρα οριζοντίου άξονα”, Αεροακουστική 2006, Ηράκλειο, 18-19 Σεπτεμβρίου.
  7. Dimitris Alimisis, Anthi Karatrantou and Nikolaos Tachos (2005), ” Technical school students design and develop robotic gear-based constructions for the transmission of motion”, Eurologo 2005, Warsaw.
  8. N.S. Tachos, A.P. Fragias, E.G Fenekos, D.P. Margaris and D.G. Papanikas (2004), “Aerodynamic Noise Prediction of a Horizontal Axis Wind Turbine Rotor” , Special Topic Conference: The Science of making Torque from Wind, EWEA, 19-21 April, Netherlands.
  9. N.S. Tachos, A.P. Fragias, A.E. Filios D.P. Margaris, D.G. Papanikas (2004),” Broadband Noise Radiation Analysis for a HAWT Rotor” 1st IC-SCCE, 8-10 September, Athens.


Follow

Get every new post delivered to your Inbox.